Grade S-135 Steel DTH Drill Rod API Standard Minig Drill Pipe for Oil and Gas Field Services
We can manufacture all kinds of drill rod as per customer's requirements.
Two force regions
The threads of the non-dig drill pipe produced in the company have two Force regions. Such structure is designed to reduce the resistance that A drill faces during the construction process. The pipes are designed to handle high torque while retaining a large inside Diameter for superior drilling fluid flow so that the threads will not deform.
Optimal design
Drill rods through the dispersion of equal strength And stress optimal design, can give full play to the Potential of drill material.
Forged connector
Connector material had been forged, that have Improved material density, changed the fibrous Texture of the material, so that the general mechanical Properties of the material have been more improved Nitride, phosphide or copper plating processing Nitride, phosphide or copper plate processing to the rod ends Have ensured thread anti-corrosion, anti-bonding, and improved Joint surface fatigue resistance.
Upsetting
Upsetting to the rods have improved The metallurgical structure and enhanced the Impact toughness, that have ensured comprehensive Mechanical properties and the friction weld seals Not be broken.
Advantage:
1. OCTG selection, rod end upsetting meets API 5D standard.
2. Thicker tube transfer of heat treatment.
3. Tool joint forced, controlled atmosphere heat treatment, up to API SPEC-7-1 standard.
4. Welding area using thermo-mechanical treatment, up to API SPEC-7 standard.
5. The thread is reverse, apply to salvage tool.
Products Parameters:
OD: 3 1/2"inch (89mm)
Wall Thickness: 9.35mm
Thread: API NC38
Length: R2 or customized
Pipe body material: E75/ G105/ S135
Tool joint material: 4137H
Thread treatment: HRC350
Strictly according to API 5DP standard
Specification of other DTH Pipes:
| Outside Diameter | Inside Diameter | Connection | Tool Joint OD | Tool Joint ID | Center Upset |
| Inch | Inch | Inch | Inch | Diameter, inch |
| 3 1/2 | 2 1/4 | NC38 | 4-3/4 (4-7/8, 5) | 2 1/4 | 4 |
| 2 1/16 | 2 1/16 |
| 4 | 2 1/2 | NC40 | 5 1/4 | 2 1/2 | 4 1/2 |
| 2 9/16 | 2 9/16 |
| 4 1/2 | 2 11/16 | NC46 | 6 1/4 | 2 11/16 | 5 |
| 2 3/4 | 2 3/4 |
| 2 13/16 | 2 13/16 |
| 5 | 3 | NC50 | 6 5/8 | 3 | 5 1/2 |
| 5 1/2 | 3 1/4 | 5-1/2FH | 7 (7-1/4, 7-1/2) | 3 1/4 | 6 |
| 3 3/8 | 3 3/8 |
| 3 7/8 | 3 7/8 |
| 4 | 4 |
| 6 5/8 | 4 | 6-5/8FH | 8 (8-1/4, 8-1/2) | 4 | 7 1/8 |
| 4 1/2 | 4 1/2 |
| 5 | 5 |
| Group | Grade | Yield Strength | Tensile Strength |
| Minimum | Maximum | Minimum |
| Psi | Mpa | Psi | Mpa | Psi | Mpa |
| 1 | E-75 | 75000 | 517 | 105000 | 724 | 100000 | 689 |
| 2 | X-95 | 95000 | 655 | 125000 | 862 | 105000 | 724 |
| G-105 | 105000 | 724 | 135000 | 931 | 115000 | 793 |
| S-135 | 135000 | 931 | 165000 | 1138 | 145000 | 1000 |
Product Tags:
|
|
Grade S-135 Steel Dth Drill Rod Api Standard Friction Welded Drill Pipe Rock Drill Rods Images
|
